Immo OFF Procedure

PROCEDURE FOR DISABLE IMMOBILIZER (IMMO OFF) IN YOUR OWN EEPROM 24C02. NO NEED CUT ANY CABLE.

PROCEDURE FOR DISABLE IMMOBILIZER (IMMO OFF) IN YOUR OWN EEPROM 24C02. NO NEED CUT ANY CABLE.

PROCEDURE FOR DISABLE IMMOBILIZSER (IMMO OFF) IN YOUR OWN EEPROM FILE FROM MC68HC11E20 PROCESSOR. DISCONNECT IMMO BOX.

PROCEDURE FOR DISABLE IMMOBILIZER (IMMO OFF) IN EEPROM 93C46. DISCONNECT IMMO BOX. THIS ECU HAVE TWO EEPROMS, THE EEPROM FOR MOD IS THE EEPROM MORE NEAR TO FLEX CABLE (SOMETIMES CAN FOUND SERIGRAPHED AS IS204 IN PCB). NEED UPLOAD YOUR FILE FOR MODIFY BY OUR WEB.

PROCEDURE FOR DISABLE IMMOBILIZER (IMMO OFF) YOUR OWN 95320 EEPROM FILE READED FROM SID803 ECU. NOT NEED CUT ANY CABLE.

PROCEDURE FOR VIRGINIZE YOUR OWN 24C02 EEPROM FILE. AFTER APPLY THIS PROCEDURE REPLACE EEPROM ORIGINAL EEPROM FOR A ST 24C16, LIFT UP PIN 7 AND SOLDER WITH PIN 8 FOR WRITE PROTECTION.

PROCEDURE FOR VIRGINIZE YOUR OWN 24C02 EEPROM FILE. AFTER APPLY THIS PROCEDURE REPLACE EEPROM ORIGINAL EEPROM FOR A ST 24C16, LIFT UP PIN 7 AND SOLDER WITH PIN 8 FOR WRITE PROTECTION.

PROCEDURE FOR VIRGINIZE YOUR OWN 24C02 EEPROM FILE. AFTER APPLY THIS PROCEDURE REPLACE EEPROM ORIGINAL EEPROM FOR A ST 24C16, LIFT UP PIN 7 AND SOLDER WITH PIN 8 FOR WRITE PROTECTION.

PROCEDURE FOR VIRGINIZE YOUR OWN 24C02 EEPROM FILE. AFTER APPLY THIS PROCEDURE REPLACE EEPROM ORIGINAL EEPROM FOR A ST 24C16, LIFT UP PIN 7 AND SOLDER WITH PIN 8 FOR WRITE PROTECTION.

PROCEDURE FOR VIRGINIZE YOUR OWN 24C02 EEPROM FILE. AFTER APPLY THIS PROCEDURE REPLACE EEPROM ORIGINAL EEPROM FOR A ST 24C16, LIFT UP PIN 7 AND SOLDER WITH PIN 8 FOR WRITE PROTECTION.