Total:

NISSAN / OPEL / RENAULT / VAUXHALL, BOSCH, EDC16CP33: INJECTORS RECODING

95320 / 95640 EEPROM
Output files
1 (BIN)

Instructions

With this procedure, you can manually reprogram the injectors in the EEPROM when fault code DF066 / DTC061176 / P0611 is present and the programmed injector codes are AAAAAAA, or when the diagnostic tool does not allow you to recode them. It also allows you to change the existing codes if required.

You must enter the codes for all 4 injectors. Each code consists of 7 digits and can be found engraved on the head of each injector.

Make sure you follow the correct injector order to avoid programming them in reverse order.

Only injector codes accepted by the ECU can be programmed. Otherwise, fault code DF066 / DTC061176 / P0611 will continue to be displayed. Not all injector codes are valid, as the ECU has an internal filtering system. Therefore, injectors from a different engine type cannot be programmed, even if they are physically identical.