Detect and remove DTCs from your ECU file
Upload your FLASH, review the detected codes and choose which ones to remove. You confirm processing.
We analyse your file first. Payment takes place after you select the DTCs.
From original file to result
Upload your FLASH
Choose your ECU family and the file read from it.
Review the DTCs
Once detection finishes, select the codes you want to remove.
Confirm processing
Pay or use your VIP. The status and download will appear on the same screen.
Prepare your analysis
You need the FLASH read from your ECU. EEPROM files cannot be used for this service.
Bosch reference: 0281013537
Compatible manufacturer references
- BMW 13617807204
- BMW 13617807529
- BMW 13617807143
- BMW 7805171
- BMW 7806013
- BMW 13617807828
- BMW 7806499
- BMW 13617806700
- BMW 7800701
- BMW 7804873
Sign in to upload your file
Your analysis and result will be saved in your account so you can access them when needed.
Selected family: BMW — Bosch EDC17C06
Sign in and upload a file Create an accountBefore uploading your file
Keep a copy of the original read and check your ECU family.
Browse supported familiesWhich file should I upload?
Upload the FLASH read from your ECU, at least 1,024,000 bytes in size. Do not upload the EEPROM. If you are unsure which memory you read, check your reading tool.
Do I need to pay before detection?
Your file is analysed for DTCs first. You then review the codes, choose which ones to remove and confirm processing by paying or using your VIP subscription if you have quota available.
What if I cannot find my ECU family?
Check the supported family catalogue. Do not choose a different family to try to force detection. If unsure, contact us with the ECU name and part number.
Where can I check the status and download the result?
After uploading, continue on your file's screen: detection, selection, confirmation and download. If you leave, you can resume from My DTC files.